COM24

Public address amplifier 240W 100V

Highlights

  • Terminal block output connections
  • Amplifier link in-& outputs
  • Remote inputs, chime & mute contacts
  • 2 unbalanced stereo line inputs
  • 6 x Microphone input
  • 5-zone output selector
  • Low impedance & constant voltage output
  • Priority audio inputs with phantom power
  • Table top or 19" rack installation
3 years

The COM series public address mixing amplifiers are providing an ideal solution for small to medium size commercial sound systems. Different configurations in terms of output power and connectivity provide enormous flexibility for numerous applications. The COM24 is capable of delivering an output power of 240 Watt to 100 Volt constant voltage systems or 4 Ohm low impedance loads. Six input channels with individual level control allow connectivity and mixing to a wide variation of music sources. Four balanced microphone inputs (XLR)containing phantom power (15V) and two priority allow connection for almost any (dynamic or condenser)microphone. Two inputs selectable between stereo unbalanced line (RCA) and microphone (6.3mm Jack) allow connection for any source such as CD-player, music computer or portable device, or enable to expand the total microphone count to 6. The remote microphone and tele-paging inputs allow expansion of the system with a paging station(with chime tones) or couple the system with your business telecom system (or any other priority line source). Using the priority mute contact, coupling and muting can be done through an external fire alarm system. The output level can be adjusted using a master volume control accompanied with 2-band tone regulation. The level is indicated with a 5-segment VU-barwhile output selection is made possible using an integrated 5-zone speaker switcher. Both table-top installation or 19” (2HE) equipment rack mounting is made possible using the included adapters.

System specifications
RMS Power 240 W
Frequency Response (± 3 dB) 20 Hz - 20 kHz
Signal / Noise > 90 dB
THD+N (@ 1 kHz) < 0.5%
Crosstalk (@ 1 kHz) > 70 dB
Technology Class-D
Power Supply Transformer
Source 230 ~ 240 V AC / 50 ~ 60 Hz
Common mode rejection ratio 70 dB
Inputs Balanced Microphone 1 - 4 Type 4 x Balanced Mic./Line (-6 dB / -50 dB)
Connector 2 x XLR/Jack Combo & 2 x XLR
Other 4 x 15 V DC Phantom & 2 x Priority
Balanced Microphone 5 Type 1 x Balanced Mic./Line (-6 dB / -50 dB)
Connector 6.3 mm Jack
Unbalanced Stereo Type 1 x Stereo Unbalanced Line (+14 dB / -30 dB)
Connector RCA
Other Remote mic (Priority mic + chime)
Tele-paging (Priority line)
Priority mute contact
Outputs Connector 2-pin Euro Terminal Block (Pitch - 5.08 mm)
10-pin Euro Terminal Block (Pitch - 5.08 mm)
Voltage / Impedance 100 V / 4 Ω
Protection DC Short circuit
Over heating
Over load
Signal limiting
Cooling Convection cooled
Operating temperature 0° ~ 40° @ 95% Humidity
Product Features
Dimensions 16.54 x 3.46 x 12.60 " (W x H x D)
Weight 24.25 lb
Mounting 19” / 2 HE or tabletop
Construction Steel
Colours Black
Accessories Included 19” Rackmount adapter

Product

Answer

As the power consumption of an amplifier, strongly depends on how hard the amplifier is driven, measurements are provided for various loads: idle, 1/8 of average full power, 1/3 of average full power, and full power.

Idle 
Current draw at idle or with very low signal level

1/8 Power: Pink Noise
Amplifiers are tested using pink noise signals to simulate real-world speech and music signals.  It approximates operating with music or voice with light clipping and represents the amplifier's typical "clean" maximum level, without audible clipping. This 1/8 power signal provides a very good approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven as loud as possible without clipping the amplifier.

1/3 Power: Pink Noise
1/3 Power Pink Noise is similar to 1/8 Power Pink Noise, except that it is a significantly more powerful input signal. It approximates operating with music or voice with very heavy clipping and a very compressed dynamic range. This 1/3 power signal provides an approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven loud enough to clip the amplifier heavily, and produce severe, audible distortion.

Full Power
Current draw at full power is measured with a sine wave at its maximum possible level. However, it does not represent any real-world operating condition and represents the absolute extremes that an amplifier could ever experience.
 

Information sheet English

Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, architect’s and engineer’s specifications, shipping and ordering details, product applications, ...

Information sheets other languages

Code Quantity Length Width Height Cubage Weight
PCS 1 0,18 m 0,43 m 0,53 m 0,03905 m³ 11,00 kg
INNER 1 0,53 m 0,44 m 0,18 m 0,04126 m³ 12,40 kg
MASTER 1 0,53 m 0,44 m 0,18 m 0,04126 m³ 12,40 kg

COM24MK2-UK - UK plug

Code Quantity Length Width Height Cubage Weight
PRODUCT 1 0,42 m 0,32 m 0,09 m 0,01183 m³ 11,00 kg
PCS 1 0,52 m 0,43 m 0,17 m 0,03828 m³ 12,40 kg
INNER 1 - - - - 11,00 kg
MASTER 3 - - - - -
PALLET 46 - - - - 506,00 kg

COM24MK2 - Mk2 version

Code Quantity Length Width Height Cubage Weight
PRODUCT 1 0,42 m 0,32 m 0,09 m 0,01183 m³ 11,00 kg
PCS 1 0,52 m 0,43 m 0,17 m 0,03828 m³ 12,40 kg
INNER 1 - - - - -
MASTER 3 - - - - -
PALLET 46 - - - - 506,00 kg
COM24MK2-UK - UK plug

COM24MK2-UK

UK plug
EAN: 5414795039117
COM24MK2 - Mk2 version

COM24MK2

Mk2 version
EAN: 5414795035171

Set solutions containing COM24

Top