CMP401 Discontinued
Microphone power adapter
The CMP401 is a microphone phantom power adapter featuring a 4-pin Mini XLR input connector and a 3-pin XLR output connector. It is designed to enable the use of mini-headset, lavalier or other small condenser microphones with a 4-pin Mini-XLR connector in any wired microphone configuration. The internal electronics convert the phantom power supplied by the mixer or pre-amplifier into a lower voltage which can be used for powering small condenser microphones. The performance of the microphone can be adjusted to fit every possible application by using the low cut filter switch and the -10 dB attenuation switch which improves the performance when used for powerful vocals, close micing high-SPL sound sources and drum kits or other powerful musical instruments. The low-cut filter switch makes it possible to eliminate low-frequency ambient noise caused by external devices or whenever lower frequency audio signals are undesirable. It features a gold plated 4-pin mini XLR connector for connecting the CMX7xx (or other) series headset microphones and a gold plated 3 pole male XLR connector for connection to a mixer or pre-amplifier with phantom power supply. It is delivered with a belt clip, making it easy to hide for the audience.
| System specifications | ||||
|---|---|---|---|---|
| Inputs | Phantom Power | 9 ~ 52 V DC | ||
| Connector | Type | 4-pin mini XLR (Shure type) | ||
| Pin 1 | Ground | |||
| Pin 2 | +5V DC Bias | |||
| Pin 3 | Microphone signal | |||
| Pin 4 | Microphone signal | |||
| Outputs | Connector | 3-pin XLR | ||
| Frequency | Response (± 3 dB) | 20 Hz - 20 kHz | ||
| THD+N (@ 1 kHz) | < 1% @ -4.8 dBV (<1% @ +4.7 dBV; -10dB attenuator enabled) | |||
| Low-cut roll-off | -6 dB @ 1 kHz | |||
| Max. Current supply | 2 mA | |||
| Product Features | ||||
|---|---|---|---|---|
| Dimensions | 0.75 x 3.70 " (Ø x L) | |||
| Weight | 0.16 lb | |||
| Construction | Metal | |||
| Colours | Black | |||
| Accessories | Included | Belt clip | ||
Information sheet English
Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, architect’s and engineer’s specifications, shipping and ordering details, product applications, ...