EPA104
Quad-channel Class-D amplifier 4 x 100W - crossover
Highlights
- Lightweight class-D amplifier
- Energy-star certified
- Standby energy saving mode
- null
- Terminal block output connections
- XLR input connections with crossover operation mode switch
- Integrated crossover
Applications
- null
- Education
- null
- Clubs
- Events
- Retail
This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode). Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors. Outputs are connected using terminal block connectors.
| System specifications | ||||
|---|---|---|---|---|
| Continuous power (AES) | @ 4 Ω Stereo | 4 x 100 W | ||
| @ 8 Ω Stereo | 4 x 50 W | |||
| @ 8 Ω Bridge | 2 x 200 W | |||
| Frequency | Response (± 3 dB) | 20 Hz - 20 kHz | ||
| Signal / Noise | > 90 dB | |||
| THD+N (@ 1 kHz) | < 0.1% (1/2 Rated Power) | |||
| Crosstalk (@ 1 kHz) | > 70 dB | |||
| Technology | Class-D | |||
| Power | Supply | Switching mode | ||
| 100 ~ 240 V AC / 50 ~ 60 Hz | ||||
| Consumption | 188 W | |||
| Standby | 0.8 Watt (30 min standby time) | |||
| Inputs | Sensitivity | 0 dB (1V RMS) | ||
| Impedance | 12 kΩ balanced | |||
| Connector | 3-pin XLR female | |||
| Protection | DC Short circuit | |||
| Over heating | ||||
| Over load | ||||
| Signal limiting | ||||
| Cooling | Convection cooled | |||
| Operating temperature | 0° ~ 40° @ 95% Humidity | |||
| Outputs | Connector | 2-pin Euro Terminal Block (Pitch - 5.08 mm) | ||
| Product Features | ||||
|---|---|---|---|---|
| Dimensions | 18.98 x 1.73 x 12.99 " (W x H x D) | |||
| Weight | 9.92 lb | |||
| Mounting | 19” | |||
| Unit height | 1 HE | |||
| Construction | Steel | |||
| Colours | Black | |||
| Product | Unit of measure | Quantity | |
|---|---|---|---|
| AU960103022 - EPA104 DEVICE | PCS | 1 | Collapse |
| AU710802021 - CON CBL 2P TERM. BLOCK 5.08MM GREEN | PCS | 4 |
Product
Answer
As the power consumption of an amplifier, strongly depends on how hard the amplifier is driven, measurements are provided for various loads: idle, 1/8 of average full power, 1/3 of average full power, and full power.
Idle
Current draw at idle or with very low signal level
1/8 Power: Pink Noise
Amplifiers are tested using pink noise signals to simulate real-world speech and music signals. It approximates operating with music or voice with light clipping and represents the amplifier's typical "clean" maximum level, without audible clipping. This 1/8 power signal provides a very good approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven as loud as possible without clipping the amplifier.
1/3 Power: Pink Noise
1/3 Power Pink Noise is similar to 1/8 Power Pink Noise, except that it is a significantly more powerful input signal. It approximates operating with music or voice with very heavy clipping and a very compressed dynamic range. This 1/3 power signal provides an approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven loud enough to clip the amplifier heavily, and produce severe, audible distortion.
Full Power
Current draw at full power is measured with a sine wave at its maximum possible level. However, it does not represent any real-world operating condition and represents the absolute extremes that an amplifier could ever experience.
Answer
Heat dissipation is the process by which electronic devices like amplifiers and processors release the heat they generate during operation to prevent overheating. This data is important because it ensures devices perform efficiently, last longer, and are safe to use. To calculate heat dissipation, you measure the device's power consumption (in watts) and use the thermal resistance (how well the device transfers heat) to determine how much heat needs to be managed. This information helps design proper cooling systems, ensuring the device remains within safe temperature limits.
The heat dissipation list for all Audac devices is in the link below.
Information sheet English
Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, architect’s and engineer’s specifications, shipping and ordering details, product applications, ...
Information sheets other languages
Technical drawings
Declarations of conformity
| Code | Quantity | Length | Width | Height | Cubage | Weight |
|---|---|---|---|---|---|---|
| PRODUCT | 1 | 0,49 m | 0,33 m | 0,05 m | 0,00809 m³ | 4,82 kg |
| PCS | 1 | 0,56 m | 0,42 m | 0,12 m | 0,02822 m³ | 5,63 kg |
| INNER | 1 | - | - | - | - | - |
| MASTER | 1 | - | - | - | - | - |
| PALLET | 34 | - | - | - | - | 213,20 kg |
