DPA616
Sixteen-channel Class-D amplifier 16 x 60W
Highlights
- Lightweight class-D amplifier
- Stereo & bridged mode
- Terminal block output connections
- 16 Channel design (8 channel bridged)
Applications
- Education
- Retail
- null
- null
The DPA616 is a professional sixteen channel power amplifier which is capable of delivering a power of 60 Watt to 4 Ohm loads connected to the 16 output channels. When used in bridge mode, it can deliver a power of 120 Watt to 8 Ohm loads connected to the 8 bridged outputs. This way, the DPA616 is the perfect solution for installed multi-zone audio distribution systems with 8 or 16 zones. This amplifier is designed as a no-nonsense amplifier with only the necessary controls and connections which creates great simplicity in use and installation. The input connections are all performed with 3-pin Terminal block connectors, allowing the connection of balanced input signals. Every channel is fitted with a separate gain control potentiometer and for every two input connectors, there is a stereo / bridge & parallel switch provided whereby two channels can be bridged or linked in parallel, avoiding a cable clutter when multiple channels should be fed with the same input signal. The output connections are performed with 4-pin Terminal block connectors allowing connections for separate or bridged output channels. A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload and limits the signal when necessary. This all is housed in a double rack space, steel 19” rack mount housing.
| System specifications | ||||
|---|---|---|---|---|
| Frequency | Response (± 3 dB) | 20 Hz - 20 kHz | ||
| Signal / Noise | > 100 dB | |||
| THD+N (@ 1 kHz) | < 0.1% | |||
| Technology | Class-D | |||
| Inputs | Sensitivity | -20 dB ~ +20 dB | ||
| Connector | 3-pin Euro Terminal Block (Pitch - 3.81 mm) | |||
| Outputs | Connector | 4-pin Euro Terminal Block (Pitch - 5.08 mm) | ||
| Power | Supply | Switching mode | ||
| Source | 100 ~ 240 V AC / 50 ~ 60 Hz | |||
| Protection | DC Short circuit | |||
| Over heating | ||||
| Over load | ||||
| Signal limiting | ||||
| Operating temperature | 0° ~ 40° @ 95% Humidity | |||
| RMS/AES power handling | @ 4 Ω Stereo | 16 x 60 W | ||
| @ 8 Ω Bridge | 8 x 120 W | |||
| @ 8 Ω Stereo | 16 x 30 W | |||
| Product Features | ||||
|---|---|---|---|---|
| Dimensions | 18.98 x 3.46 x 12.68 " (W x H x D) | |||
| Weight | 18.078 lb | |||
| Mounting | 19” | |||
| Unit height | 2 HE | |||
| Construction | Steel | |||
| Colours | Black | |||
| Accessories | Included | 16 x 3-pin Euro Terminal Block Input connectors | ||
| 8 x 4-pin Euro Terminal Block outputs connector | ||||
| Product | Unit of measure | Quantity | |
|---|---|---|---|
| AU515002010 - MOD AMPLIFIER DPA616 | PCS | 1 | Collapse |
| AU515002005 - MOD POWER SUPPLY COMPLETE DPA616 MOD POWER SUPPLY COMPLETE DPA616 | PCS | 1 | Collapse |
| AU515002007 - PCBA DPA616 - INPUT BOARD V1.2 | PCS | 1 | |
| AU520002003 - CABLE SET FOR R2 & M2 POWER AM PLIFIER KIT | PCS | 1 | Collapse |
| AU350000101 - FAN BALL BEARING 0.25A 24V DC 80X80X25MM 150MM CABLE | PCS | 1 | |
| AU710802041 - CON CBL 4P TERM. BLOCK 5.08MM GREEN | PCS | 8 | |
| AU710804031 - CON CBL 3P TERM. BLOCK 3.81MM GREEN | PCS | 16 |
Product
Answer
As the power consumption of an amplifier, strongly depends on how hard the amplifier is driven, measurements are provided for various loads: idle, 1/8 of average full power, 1/3 of average full power, and full power.
Idle
Current draw at idle or with very low signal level
1/8 Power: Pink Noise
Amplifiers are tested using pink noise signals to simulate real-world speech and music signals. It approximates operating with music or voice with light clipping and represents the amplifier's typical "clean" maximum level, without audible clipping. This 1/8 power signal provides a very good approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven as loud as possible without clipping the amplifier.
1/3 Power: Pink Noise
1/3 Power Pink Noise is similar to 1/8 Power Pink Noise, except that it is a significantly more powerful input signal. It approximates operating with music or voice with very heavy clipping and a very compressed dynamic range. This 1/3 power signal provides an approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven loud enough to clip the amplifier heavily, and produce severe, audible distortion.
Full Power
Current draw at full power is measured with a sine wave at its maximum possible level. However, it does not represent any real-world operating condition and represents the absolute extremes that an amplifier could ever experience.
Information sheet English
Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, architect’s and engineer’s specifications, shipping and ordering details, product applications, ...
Information sheets other languages
Manuals
Technical drawings
Certificates
| Code | Quantity | Length | Width | Height | Cubage | Weight |
|---|---|---|---|---|---|---|
| PRODUCT | 1 | 0,44 m | 0,30 m | 0,09 m | 0,01168 m³ | 8,20 kg |
| PCS | 1 | 0,57 m | 0,43 m | 0,19 m | 0,04657 m³ | 9,60 kg |
| INNER | 1 | - | - | - | - | - |
| MASTER | 1 | - | - | - | - | - |
| PALLET | 23 | - | - | - | - | 188,60 kg |
